IPCC — Indian Pest Control Company

Pharmaceutical segment

Pest Control for API & Bulk Drug Plants

Drum yards, open process bays and solvent areas — bird-proofing and ICH Q7-mapped SOPs.

27+ years in business 5 requirements mapped
Our approach

How we protect API and bulk drug plants

API plants are large, partly open and full of drums. ICH Q7 allows closed systems and drums to sit outdoors — which is exactly how birds, lizards and rodents end up on material that later goes into a reactor. Our API programme closes the building, protects the drum yard and gives QA an SOP that maps to ICH Q7 and Schedule M Part XII.

Why now

Why API plants get pest findings

API sites are allowed to store and process outdoors. That makes the building envelope and the drum yard the front line.

4.72

ICH Q7 clause on pest control

Requires written procedures for rodenticides, insecticides, fungicides and fumigants. Schedule M Part XII repeats it as 4.7.3.

7.43

ICH Q7 allows outdoor drum storage

Drums stored outside must be cleaned before opening — so every drum lid is a bird and rodent surface.

12.2.9

Revised Schedule M, Part I

Premises must give maximum protection against insects, birds and other animals, with a rodent and pest-control procedure.

What USFDA has found at Indian API sites

  • Birds flying inside warehouse buildings, droppings on drum tops, a nest in the roof, and lizards and cats among API drums (API warehouse, Andhra Pradesh — Form 483, 2025).
  • A customer complaint of a live insect inside a sealed API container (API site, Karnataka — Form 483, 2025).
  • Birds and insects near open manufacturing equipment in areas open to the outdoors (API site, Tamil Nadu — warning letter, 2018).
  • Holes in walls and roof letting pigeons reach production equipment (API site, Gujarat — warning letter, 2015).

Source: public USFDA Form 483 observations and warning letters. Birds and gaps in the building come up again and again at API sites.

Pest profile

Pests we target in API and bulk drug plants

  • Pigeons and sparrows

    Drum yards, warehouse roofs, open process bays

  • Rats and bandicoots

    Perimeter, drum stores, cable trenches, drains

  • Lizards

    Warehouses and semi-open bays

  • Cats and other animals

    Open-sided warehouses

  • Stored-product insects

    Dispensing, packing and packaging-material stores

Compliance map

What the auditor asks for — and what you hand over

Every GMP standard asks for the same proof. This is how our programme answers each requirement.

Pest-control requirements by regulation and the IPCC deliverable for each
Written procedure for rodenticides, insecticides and fumigantsSource: ICH Q7 4.72 · Schedule M Part XII 4.7.3API-specific SOP listing every product, where it may be used and where it may not.
Protection against insects, birds and other animalsSource: Schedule M Part I 12.2.9 · EU-GMP Chapter 3.4Closure-grade bird-proofing of warehouses and process bays — not just netting.
Pest-control materials must not touch or contaminate productSource: Schedule M Part I 14.3 and 16.5Approved-use map: no chemicals near open equipment, charging areas or opened drums.
Outdoor containers cleaned before openingSource: ICH Q7 7.43 · Schedule M Part XII 7.4.4Drum-yard bird deterrence and a droppings-cleaning log QA can show an inspector.
Pest control as a mandatory SOPSource: Schedule M Part I 17.3.10.1(f)Signed, version-controlled SOP ready for your document system.
Zone by zone

How we protect each part of the plant

Different zones carry different risks. The method changes with the zone — the documentation does not.

Drum yard and open-sided warehouses

Risk: Birds roosting above drums; droppings on lids.

What we do: Roof-seam and gap closure, ledge spikes, netting where closure is not possible, and a drum-lid cleaning log.

Solvent tank farm and flammable stores

Risk: Rodents in cable trenches and pipe racks.

What we do: Bait stations, glue boards and proofing only. No fogging or electric insect killers near vapour — checked against your hazardous-area classification.

Open process bays and charging areas

Risk: Birds and insects near open equipment.

What we do: Monitoring only inside; exclusion at every building opening.

Raw-material and intermediate stores

Risk: Rodents and stored-product insects.

What we do: Numbered rodent stations, insect monitoring and monthly trend reports.

Dispensing and packing

Risk: Insects getting into containers before sealing.

What we do: Monitoring traps at dispensing, packing and the packaging-material store, tracked by month.

Perimeter and effluent plant

Risk: Rodent burrows and breeding sites.

What we do: External bait stations at fixed intervals and drain treatment.

Audit evidence pack

The documents you hand the inspector

  • Pest-control SOP and risk assessment

    Written for your site, version-controlled, ready to file in your QA system.

  • Numbered device map

    Every rodent station, glue board and insect light trap marked on your site plan.

  • Service visit reports

    Signed after every visit: what was checked, what was found, what was done.

  • Monthly trend analysis

    Pest activity by zone and by month, so QA sees problems before an inspector does.

  • Approved chemical list

    CIB&RC-registered products only, with labels and safety data sheets.

  • Licence and training records

    Operator licence and technician training records for your vendor-qualification file.

  • Corrective-action log

    Each finding root-caused and closed with evidence, ready for your CAPA system.

How it works

From first visit to inspection-ready

  1. Free audit-readiness inspection

    We walk the plant with your QA or engineering lead — warehouses, AHU spaces, docks and perimeter.

  2. Gap summary

    What an inspector would likely find today, mapped to Schedule M, USFDA or WHO-GMP, with photos.

  3. Programme and SOP

    Device map, service frequency and approved chemicals, agreed with QA before work starts.

  4. Monthly service and trend reports

    A report after every visit and a trend analysis every month, by zone and by pest.

  5. Quarterly review and CAPA closure

    Findings reviewed with QA and closed with evidence, ready for your next inspection.

The first inspection is free and carries no obligation.

Free inspection

Book a free API plant inspection.

We walk your drum yard, warehouses and process bays with QA and show you what an inspector would find — and how to close it.

98114 90080
Audits you prepare for

By submitting, you agree to be contacted by IPCC. See our privacy policy.

FAQ

Common questions from API and bulk drug plants

Our drums sit in an open-sided shed. How do you keep birds off without enclosing it?

We close what can be closed — roof seams, wall gaps and ledges — and use spikes or netting where it cannot. Drums that stay outside get a documented cleaning step before opening, as ICH Q7 7.43 expects, so QA has a record either way.

Can you work near our solvent yard and hazardous zones?

Yes, with restrictions. Near solvent storage we use bait stations, glue boards and physical proofing only — no fogging and no electric insect killers. Every method is checked against your hazardous-area classification before work starts.

Will your SOP map to ICH Q7 and Schedule M Part XII for our export dossiers?

Yes. The SOP references ICH Q7 4.72 and Schedule M Part XII 4.7.3, lists every product we use with its CIB&RC registration, and shows where each may and may not be used.

How do insects end up inside sealed API containers?

Usually before sealing — at dispensing, packing or in the packaging-material store. We put monitoring traps in those areas and track catches by month, so QA can show where the source was and that it has been controlled.

Do you fumigate API plants?

Only where QA approves it, using approved operators and products. Schedule M Part I 16.5 says fumigants must not contaminate equipment or materials, so most API work relies on exclusion, monitoring and baiting instead.

Free inspection

Get your API and bulk drug plant audit-ready.

We walk your drum yard, warehouses and process bays with QA and show you what an inspector would find — and how to close it.