Pharmaceutical segment
Pest Control for Tablet & Capsule Plants
Beetles in excipient stores, birds in AHU rooms — and no sprays near compression or coating.
How we protect tablet and capsule plants
Oral solid dosage plants handle tonnes of starch-rich material and fine powder. That makes them a feeding ground for stored-product beetles — the drugstore beetle is named for eating dried drugs. Add birds getting into AHU rooms, and you have the two problems OSD inspectors look for. Our programme targets both, without ever spraying near product.
Why OSD plants get pest findings
Two things go wrong in tablet and capsule plants: beetles breed where powder and starch collect, and birds get into the air-handling spaces.
2 beetles
Drugstore and cigarette beetle
Both feed on almost any dried plant material. The drugstore beetle prefers starch-rich material — common in OSD raw-material stores.
14.3
Schedule M rule on product contact
Nothing used for pest control may come into contact with product — so compression and coating rooms are monitor-only.
Part VIII
Schedule M section for tablets & capsules
Sets dust-extraction and humidity controls. Where powder settles, insects feed — so our monitoring covers duct runs and corners too.
What USFDA has found at Indian formulation plants
- Bird droppings and feathers in the AHU area, with birds entering through numerous gaps in exterior walls — and netting that did not stop insects (tablet plant, Telangana — warning letter, 2025).
- A live bird inside a raw-material warehouse (formulation site — Form 483 in 2026, followed by an import alert).
Source: public USFDA warning letters and Form 483 observations. Bird-proofing that only uses netting was not accepted — the building had to be closed.
Pests we target in tablet and capsule plants
Drugstore beetle
Starch-rich raw materials, excipient stores, dispensing
Cigarette beetle
Plant-based actives, cartons and packaging stores
Indian meal moth
Raw-material stores
Pigeons and sparrows
AHU rooms, louvres, roofs
Rodents
Warehouse, docks, perimeter
Cockroaches
Canteen, drains, utility areas
What the auditor asks for — and what you hand over
Every GMP standard asks for the same proof. This is how our programme answers each requirement.
| Requirement | Where auditors look for it | What IPCC gives you |
|---|---|---|
| Written rodent and pest-control procedure | Source: Schedule M Part I 12.2.9 and 17.3.10.1(f) | OSD-specific SOP with a zone map. |
| Nothing used for pest control may touch product | Source: Schedule M Part I 14.3 | Monitor-only plan for dispensing, granulation, compression, coating and packing. |
| No contamination from rodenticides, insecticides or fumigants | Source: Schedule M Part I 16.5 · USFDA 21 CFR 211.56 | Chemical work kept to outer zones, with a use log QA can audit. |
| Dust control and environmental conditions | Source: Schedule M Part VIII (dust extraction, temperature, humidity) | Monitoring that covers dust-extraction runs, corners and low-humidity suites. |
| Evidence that the programme works | Source: GMP self-inspection · USFDA and customer audits | Species-level trend reports: which beetle, which store, which month. |
How we protect each part of the plant
Different zones carry different risks. The method changes with the zone — the documentation does not.
Excipient and raw-material store
Risk: Stored-product beetles and moths breeding in sacks and drums.
What we do: Pheromone and food-attractant traps named by target species, with monthly trend reports.
Dispensing and sampling booths
Risk: Spilled powder attracts insects.
What we do: Monitoring only, with cleaning feedback to production.
Granulation, compression and coating
Risk: Any contact with product is a contamination finding.
What we do: No sprays. Glue boards outside the rooms; control done in corridors and outer zones.
AHU rooms, louvres and roof
Risk: Birds roosting and entering through wall gaps.
What we do: Mesh on louvres and intakes sized to keep airflow, gap sealing and ledge spikes.
Packing hall and packaging-material store
Risk: Beetles in cartons; rodents.
What we do: Insect traps and numbered rodent stations.
Canteen, drains and utilities
Risk: Cockroaches and rodents that push into production.
What we do: Gel baiting, drain treatment and outer-zone baiting.
The documents you hand the inspector
Pest-control SOP and risk assessment
Written for your site, version-controlled, ready to file in your QA system.
Numbered device map
Every rodent station, glue board and insect light trap marked on your site plan.
Service visit reports
Signed after every visit: what was checked, what was found, what was done.
Monthly trend analysis
Pest activity by zone and by month, so QA sees problems before an inspector does.
Approved chemical list
CIB&RC-registered products only, with labels and safety data sheets.
Licence and training records
Operator licence and technician training records for your vendor-qualification file.
Corrective-action log
Each finding root-caused and closed with evidence, ready for your CAPA system.
From first visit to inspection-ready
Free audit-readiness inspection
We walk the plant with your QA or engineering lead — warehouses, AHU spaces, docks and perimeter.
Gap summary
What an inspector would likely find today, mapped to Schedule M, USFDA or WHO-GMP, with photos.
Programme and SOP
Device map, service frequency and approved chemicals, agreed with QA before work starts.
Monthly service and trend reports
A report after every visit and a trend analysis every month, by zone and by pest.
Quarterly review and CAPA closure
Findings reviewed with QA and closed with evidence, ready for your next inspection.
The first inspection is free and carries no obligation.
Book a free OSD plant inspection.
We check your excipient stores, AHU rooms and packing hall with QA and show you what an inspector would find — and how to close it.
98114 90080Common questions from tablet and capsule plants
What traps do you put in the excipient store, and can you tell the beetles apart?
We use pheromone and food-attractant traps for drugstore beetle, cigarette beetle and Indian meal moth, placed on a numbered map. Catches are identified by species, so your trend report shows which beetle, where and when.
How do you bird-proof AHU rooms without blocking airflow?
We fit mesh on louvres and intakes, seal gaps in walls and roof, and put spikes on ledges where birds roost. The mesh is sized to stop birds without starving the AHU of air, and the work is photographed for your file.
What do you do inside compression and coating rooms?
Monitoring only. Schedule M Part I 14.3 says nothing used for pest control may touch product, so we place glue boards outside the rooms, control pests in the corridors and outer zones, and inspect inside without applying anything.
Why do beetles keep coming back after treatment?
Usually because they are breeding in a store, a carton or a dust pocket that spraying never reaches. Species-level trapping finds the source; cleaning and stock rotation remove it.
How often should a tablet or capsule plant be serviced?
No regulation fixes a frequency. Most OSD plants need monthly service, with more frequent checks of excipient stores in humid months. We set the frequency after the inspection.
Other pharmaceutical segments
Different products, different pest risks. See the programme for each.
API / Bulk Drugs
Drum yards, open process bays and solvent areas — bird-proofing and ICH Q7-mapped SOPs.
See the programmeSterile Injectables & Ophthalmics
Zero chemicals in Grade A/B — drains, airlocks and the building envelope, written into your CCS.
See the programmeAyurvedic, Herbal & Nutraceuticals
Beetles and moths in raw-herb stores, approved fumigation, Schedule T and FSSAI records.
See the programmeWarehousing & Distribution
Docks, racking, cold rooms and vehicles — GDP-ready records for C&F agents and distributors.
See the programmeGet your tablet and capsule plant audit-ready.
We check your excipient stores, AHU rooms and packing hall with QA and show you what an inspector would find — and how to close it.